Rohde and Schwarz ZNL3 Vector Network Analyzer (5 kHz to 3
$16,484.00
Technical Specs
Rohde and Schwarz ZNL3 - Vector Network Analyzer (5 kHz to 3 GHz) Specs
| Frequency range | 5 kHz to 3 GHz |
| Dynamic range | > 120 dB (spec.); typ. > 130 dB |
| Output power | 0 dBm (spec.); typ. + 3dBm |
| Trace noise | < 0.0035 dB (spec.); typ. < 0.0005 dB |
| Sweep time | 401 points, 2-port TOSM, 200 MHz span, 100 kHz IFBW |
| Data transfer | over IEC/IEEE/GPIB, 201 points |
| HiSLIP over 1 Gbit/s LAN | typ. 2.5 ms |
| Measurement parameters | S-parameters (Sxy), wave quantities, wave ratios, impedance parameters (Zxy), admittance parameters (Y), stability factors |
| Display formats | dB, magnitude, phase, Smith chart, polar diagram, SWR, unwrapped phase, linear magnitude, inverse Smith chart, real, imaginary, delay |
| Calibration methods | reflection normalization (open or short), reflection (OSM (OSL)), enhanced reflection normalization (OM or SM), transmission normalization (response calibration), transmission normalization in both directions (response calibration), one-path twoport, TOSM (SOLT) |
| Number of points | vector network analyzer mode |
| spectrum analyzer mode | 101 to 100001 |
| IF bandwidth (IFBW) | 1 Hz to 500 kHz, in steps of 1/1.5/2/3/5/7 |
| Frequency range | 5 kHz to 3 GHz (1 Hz resolution) |
| Displayed average noise level (DANL) | RF attenuation 0 dB |
| Phase noise | 1 GHz, 10 kHz offset |
| Max. signal analysis bandwidth | with R&S®FPL1-B40 option |
| Third-order intercept point (TOI) | 300 MHz ≤ fin ≤ 3 GHz |
| Second-harmonic intercept (SHI) | 900 MHz ≤ fin ≤ 1.5 GHz |
| Limit lines | vector network analyzer mode |
| Number of channels | within one vector network analyzer setup |
| Number of channel setups | max. 14 |
| Number of traces (simultaneous display) | vector network analyzer mode |
| spectrum analyzer mode (R&S®ZNL3-B1/R&S®ZNL4-B1/ ZNL6-B1 option) | 6 |
| Number of markers | vector network analyzer mode |
| spectrum analyzer mode (R&S®ZNL3-B1/R&S®ZNL4-B1/ ZNL6-B1 option) | 16 |
| Operating system | Windows 10 |
| Display | 10.1" (26.4 cm) WXGA color LCD, multitouch screen |
| Dimensions (W × H × D) | 408 mm × 186 mm × 235 mm (16.06 in × 7.32 in × 9.25 in) |
| Weight | depending on configuration |
Reviews (0)
You must be logged in to post a review.
Reviews
There are no reviews yet.