Rohde and Schwarz ZPH-COM2 Two Port Cable Rider (.12 Model)
$8,421.00
Technical Specs
Rohde and Schwarz ZPH-COM2 - Two Port Cable Rider (.12 Model) with Several Options Specs
| Frequency range | R&S Cable Rider ZPH (two-port combi model .12) |
| with R&S ZPH-K1 option | 5 kHz to 3 GHz |
| with R&S ZPH-B4 and R&S ZPH-K1 options | 5 kHz to 4 GHz |
| Frequency resolution | 1 Hz |
| Spectral purity, SSB phase noise | f = 500 MHz, carrier offset 30 kHz |
| f = 500 MHz, carrier offset 100 kHz | < 98 dBc (1 Hz), typ. 105 dBc (1 Hz) |
| f = 500 MHz, carrier offset 1 MHz | < 118 dBc (1 Hz), typ. 125 dBc (1 Hz) |
| Displayed average noise level (DANL) | 0 dB RF attenuation, termination 50 Ω, RBW = 1 kHz, VBW = 10 Hz, sample detector, log scaling, normalized to 1 Hz |
| 1 MHz to 10 MHz | < 130 dBm, typ. 135 dBm |
| 10 MHz to 1 GHz | < 142 dBm, typ. 146 dBm |
| 1 GHz to 4 GHz | < 140 dBm, typ. 144 dBm |
| 1 MHz to 10 MHz | < 150 dBm, typ. 160 dBm |
| 10 MHz to 3 GHz | < 158 dBm, typ. 163 dBm |
| 3 GHz to 4 GHz | < 156 dBm, typ. 161 dBm |
| Individual measurements | reflection (S11), one-port cable loss, distance-to-fault |
| Port output power | controlled via tracking generator attenuation |
| Maximum permissible spurious signal | measurement = reflection (S11)/one-port cable loss/distance-to-fault analysis |
| Data points | selectable |
| Corrected directivity with R&S ZN-Z103 option | 2MHz ≤f ≤4GHz (with R&S ZPH-B4 option) |
| Measurement speed | 0.3 ms/point |
| Result formats | magnitude, VSWR, magnitude and distance-to fault, VSWR and distance-to-fault |
| Result format | magnitude |
| Range | selectable |
| Result formats | return loss (dB), VSWR |
| Fault resolution | 1.5m × 108m × velocity factor/span |
| Maximum cable length | depending on cable loss |
| DC voltage | 50 V |
| CW RF power | model .02: port 1 (power meter input) |
| model .12: port 1 (RF input) | 20 dBm |
| port 2 (reflectometer input) | 23dBm |
| Display resolution | WVGA |
| Battery (R&S HA-Z306 option) | capacity |
| voltage | 11.25 V (nom.) |
| Operating time with new, fully charged battery | one-port model .02 |
| two-port combi model .12, spectrum analyzer mode | 9 h |
| two-port combi model .12, cable and antenna analyzer mode | 6.5 h |
| Dimensions | W × H × D |
| Weight | 2.5 kg (5.5 lb) |
Reviews (0)
You must be logged in to post a review.
Reviews
There are no reviews yet.