Technical Specs
Chroma 11210 - Battery Cell Insulation Tester Specs
| Main Functions | Insulation Resistance (IR) Leakage Current (LC) measurement Partial Discharge(PD)* detection (option) |
| Output Voltage | 1.0V ~ 100V, step 0.1V 101V ~ 1000V, step 1V Accuracy: ±(0.5% Setting + 0.5% Range) |
| Charging Current | 0.5mA ~ 50mA, step 0.5mA Accuracy: ±(1.5 % Setting + 1.5% Range) |
| IR (Insulation Resistance) | 0.01kΩ ~ 10 TΩ [kΩ, MΩ, GΩ] |
| LC (Leakage Current) | 00.00nA ~ 20.00mA [nA, uA, mA] |
| LC | 20.00nA |
| 200.0nA | ±(1.0% Reading + 1.0% Range) [Note 1] |
| 2.000uA | ±(0.3% Reading + 0.3% Range) [Note 1] |
| 20.00uA | ±(0.3% Reading + 0.3% Range) [Note 1] |
| 200.0uA | ±(0.3% Reading + 0.3% Range) [Note 1] |
| 2.000mA | ±(0.3% Reading + 0.3% Range) [Note 1] |
| 20.00mA | ±(0.3% Reading + 0.3% Range) [Note 1] |
| Vmea | 100V |
| 1000V | ±(0.3% Reading + 0.3% Range) [Note 1] |
| IR | Defined by LC and Vmea measurement accuracy |
| LC Range | 20nA, 200nA, 2uA, 20uA, 200uA, 2mA, 20mA; Auto-Range (automatically range selection) |
| Charge | 0.005s ~ 9.999s, step 0.001s |
| Dwell | 0.005s ~ 9.999s, step 0.001s |
| Test | 0.005s ~ 9.999s, step 0.001s |
| Integration Time | 1ms |
| Magnitude Detected | Level 0 ~ 99 |
| Number of Occurrence | 0 ~ 99 |
| Type of PD Occurrence | VPD (PD occurred in CC mode) CPD (PD occurred in CV mode) |
| Judgement Criteria | Magnitude or the number of occurrence or both |
| Waveform Display | Both voltage and current waveform |
| Quick Shot (image) of PD Occurrence | Up to 10 shots (image) per test can be recorded |
| Max. Sampling Rate | 5MHz |
| Correction | Null cancellation function (open circuit) |
| Comparator | Upper limit, lower limit for LC/IR measurement |
| Contact Check | ≤5ms, pre-test, post-test or both. |
| Interface | Ethernet, Handler, RS-232, USB-Host (front panel), USB-Device (rear panel) |
| Operation Environment | Temperature:0°C ~ 40°C Humidity:10% ~ 90% RH |
| Input Power Requirement | 90Vac ~ 132Vac or 180Vac ~264Vac ; 47Hz ~ 63Hz |
| Power Consumption | 300 VA |
| Outline Dimension (H x W x D) | 100 x 320 x 400 mm |
| Weight | 10 Kg |
Reviews (0)
Be the first to review “Chroma 11210 – Battery Cell Insulation Tester” Cancel reply
You must be logged in to post a review.

Reviews
There are no reviews yet.