Fluke Networks DSX2-8000-ADD-R Remote

$8,913.00

Technical Specs

Fluke Networks DSX2-8000-ADD-R - DSX2-8000 Add-on Kit with Remote Specs

Brand Monarch
Shielded and unshielded pair LAN cabling TIA Category 3, 4, 5, 5e, 6, 6A, 8: 100 Ω ISO/IEC Class C, D, E, EA, F, FA, and I/II: 100 Ω and 120 Ω
Permanent link adapters Plug type: shielded RJ45   Optional Plug type: Tera
Channel adapters Jack type: shielded RJ45   Optional Jack type: Tera, GG45
TIA Cat 3, 4, 5, 5e, 6, 6A, 8 per ANSI/TIA-568.2-D
ISO/IEC Class C, D, E, EA, F, FA, I/II certification per ISO/IEC
Maximum frequency DSX-8000: 2000 MHz;   DSX-5000 1000 MHz
Speed of Autotest DSX-8000: Full 2-way Autotest of Cat 5e or 6/Class D or E: 7 seconds. Full 2-way Autotest of Cat 6A/Class EA: 8 seconds. Full 2- way Autotest of Category 8: 16 seconds   DSX-5000: Full 2-way Autotest of Cat 5e or 6/Class D or E: 9 seconds Full 2-way Autotest of Cat 6A/Class EA: 10 seconds
Support test parameters (The selected test standard determines the test parameters and the frequency range of the tests) Wire Map, Length, Propagation Delay, Delay Skew, DC Loop Resistance, Pair-to-Pair Resistance Unbalance, Pair Resistance Unbalance, Insertion Loss (Attenuation), Return Loss (RL), Common Mode Return loss (CMRL), Near-End Crosstalk (NEXT), Far End Crosstalk (FEXT), Attenuation-to-crosstalk Ratio (ACR-N), ACR-F (ELFEXT), Power Sum ACR-F (ELFEXT), Power Sum NEXT, Power Sum ACR-N, Power Sum Alien NEXT (PS ANEXT), Power Sum Alien Attenuation NEXT Ratio Far End (PS AACR-F), Common Mode to Differential Mode NEXT (CDNEXT), Transverse Conversion Loss (TCL), Equal Level Transverse Conversion Transfer Loss (ELTCTL).
Input protection Protected against continuous telco voltages and 100 mA over-current. Occasional ISDN over-voltages will not cause damage
Display 5.7 in LCD display with a projected capacitance touchscreen
Case High impact plastic with show absorbing over mold
Dimensions Main Versiv unit with DSX module and battery installed: 2.625 in x 5.25 in x 11.0 in (6.67 cm x 13.33 cm x 27.94 cm)
Weight Main Versiv unit with DSX module and battery installed: 3 lbs, 5oz (1.28 kg)
Main unit and remote Lithium-ion battery pack, 7.2 V
Typical battery life 8 hours
Charge time* Tester off: 4 hours to charge from 10 % capacity to 90 % capacity
Languages supported English, French, German, Italian, Japanese, Portuguese, Spanish, Chinese, Korean, Russian, Trad Chinese, Czech, Polish, Swedish, Hungarian
Calibration Service center calibration period is 1 year
Integrated Wi-Fi Meets IEEE 802.11 a/b/g/n; dual-band (2.4 GHz and 5 GHz)
Operating Temperature 32° F to 113° F (0° C to 45° C)
Storage Temperature -14° F to +140° F (-10° C to +60° C)
Operating relative humidity (% RH without condensation) 0% to 90%, 32° F to 95° F (0° C to 35° C)   0% to 70%, 95° F to 113° F (35° C to 45 °C)
Vibration Random, 2 g, 5 Hz-500 Hz
Shock 1 m drop test with and without module and adapter
Safety CSA 22.2 No. 61010, IEC 61010-1 3rd Edition
Operating altitude 13,123 ft (4,000 m)   10,500 ft (3,200 m) with ac adapter
EMC EN 61326-1
DSX-8000 Category 8 test modes (or lower link categories) Class I/II test modes
DSX-5000 Category 6A/Class EA test modes (or lower link categories) Class FA test modes
Length of Twisted Pair Cabling Without Remote or in DSX-5000 Long Communication Mode
Range 800 m (2600 ft)
Resolution 0.1 m or 1 ft
Accuracy ± (0.3 m + 2 %); 0 m to 150 m   ± (0.3 m + 4 %); 150 m to 800 m
Propagation Delay Without Remote or in DSX-5000 Long Communication Mode
Range 4000 ns
Resolution 1 ns
Accuracy ± (2 ns + 2 %); 0 ns to 750 ns   ± (2 ns + 4 %); 750 ns to 4000 ns
Range 0 ns to 100 ns
Resolution 1 ns
Accuracy ± 10 ns
Range 0 Ω to 540 Ω
Resolution 0.1 Ω
Accuracy ± (1 Ω + 1 %)
Overload recovery time Less than 10 minutes to rated accuracy following an overvoltage. Referencing is required after repeated or prolonged overvoltage.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Fluke Networks DSX2-8000-ADD-R Remote”
SKU: Fluke-Networks-DSX2-8000-ADD-R Category: Brand: