Brand	Tempo
Measurable cable	Twisted-pair cable 100ohm characteristic impedance, shielded and unshielded, CAT 3, 4, 5, 5e and 6
Compatible connectors	RJ-45 plugs
Wiremap Check	Wiring condition and shielding can be confirmed using the HIOKI TERMINATOR 9690. Detectable errors: open, short, reversed, transposed, split pairs and other miswiring
Cable Length Check	Measurable lengths: 2 to 300 m, 6.6 to 984 ft Measurement accuracy: ± 4% rdg. ± 1 m, ± 4% rdg. ± 3.3 ft Display resolution: 0.1 m, 0.3ft
Direction Check	Up to 21 cables can be identified using the supplied TERMINATOR 9690 and optional Models 9690-01 to 9690-04
Display	128 x 64 dot matrix LCD (with backlight)
Functions	Auto Backlight: pressing a button turns the backlight on (it turns off automatically after about 20 seconds) Beeper: sounds when pressing buttons and when measurement results are displayed Energy-Saving Mode: enter into energy-saving mode after measurement (and resume when the TEST button is pressed) Auto Power Save: the 3665-20 turns off automatically about 10 minutes after the last button press Battery Check: Battery indicator blinks when voltage falls below 2.4 V Unit Switch: Select between meters or feet
Power Supply	Two AA-size (LR6) alkaline batteries 1.4VA Approx. 50 hours
Dimensions, Mass	Approx. 85 W x 130 H x 33 D mm, approx. 160 g

Hioki 3665-20 LAN CABLE HiTESTER

$316.00

Technical Specs

Brand	Tempo
Measurable cable	Twisted-pair cable 100ohm characteristic impedance, shielded and unshielded, CAT 3, 4, 5, 5e and 6
Compatible connectors	RJ-45 plugs
Wiremap Check	Wiring condition and shielding can be confirmed using the HIOKI TERMINATOR 9690. Detectable errors: open, short, reversed, transposed, split pairs and other miswiring
Cable Length Check	Measurable lengths: 2 to 300 m, 6.6 to 984 ft Measurement accuracy: ± 4% rdg. ± 1 m, ± 4% rdg. ± 3.3 ft Display resolution: 0.1 m, 0.3ft
Direction Check	Up to 21 cables can be identified using the supplied TERMINATOR 9690 and optional Models 9690-01 to 9690-04
Display	128 x 64 dot matrix LCD (with backlight)
Functions	Auto Backlight: pressing a button turns the backlight on (it turns off automatically after about 20 seconds) Beeper: sounds when pressing buttons and when measurement results are displayed Energy-Saving Mode: enter into energy-saving mode after measurement (and resume when the TEST button is pressed) Auto Power Save: the 3665-20 turns off automatically about 10 minutes after the last button press Battery Check: Battery indicator blinks when voltage falls below 2.4 V Unit Switch: Select between meters or feet
Power Supply	Two AA-size (LR6) alkaline batteries 1.4VA Approx. 50 hours
Dimensions, Mass	Approx. 85 W x 130 H x 33 D mm, approx. 160 g

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Hioki 3665-20 LAN CABLE HiTESTER”

You must be logged in to post a review.

SKU: Hioki-3665-20 Category: Copper Testing Brand: Hioki