Technical Specs
Instek PEL-3211 Booster unit for PEL-3111 only Specs
| Model | PEL-3021 |
| Voltage | 1.5V-150V |
| Current | 35A |
| Power | 175W |
| Operating Range | 0-35A, 0-3.5A, 0-0.35A |
| Accuracy of Setting | H,M,L |
| Accuracy of Setting (Parallel) | H,M,L |
| Resolution | 1mA, 0.1mA, 0.01mA |
| Operating Range | Range |
| M | 23.3336S-400µS (428.566 mΩ ~ 25 kΩ) |
| L | 0.233336S~4µS (4.28566Ω~250kΩ |
| Accuracy of Setting | H,M,L |
| Resolution | 400µS, 40µS, 4µS |
| Operating Range | Range |
| L | 1.5V~15V |
| Accuracy of Setting | H,L |
| Resolution | H,L |
| Operating Range | Range |
| M | 1.75W~17.5W |
| L | 0.175W~1.75W |
| Resolution | H,M,L |
| Resolution | 10mW, 1mW, 0.1mW |
| Capacity | 875W |
| Setting Range (CC mode) | Range |
| M | 250µA/µs~250mA/µs |
| L | 25µA/µs~25mA/µs |
| Setting Range (CR mode) | Range |
| M | 25µA/µs~25mA/µs |
| L | 2.5µA/µs~2.5mA/µs |
| Accuracy of Setting | H,M,L |
| Voltmeter | Accuracy |
| Ammeter | Accuracy |
| Ammeter (Parallel Operation) | Accuracy |
| Operation Mode | CC and CR |
| T1 & T2 | 0.025ms~10ms/Res :1µs ; 1ms~30s/Res :1ms |
| Accuracy | 1µs ; 1ms ±100ppm |
| Slew Rate | Range |
| M | 250µA/µs~250mA/µs |
| L | 25µA/µs~25mA/µs |
| Current Accuracy | ±0.4%FS |
| Overvoltage protection (OVP) | Adjustable ; Turns off the load at 110% of the rated voltage |
| Overcurrent protection (OCP) | 0.03A~38.5A(Adjustable) |
| Overpower protection (OPP) | 0.1W~192.5W(Adjustable) |
| Overheat protection (OHP) | Turns off the load when the heat sink temperature reaches 95°C |
| Undervoltage protection (UVP) | Adjustable : Turns off the load when detected Can be set in the range of 0 V to 150 V or Off |
| Reverse connection protection(REV) | By diode. Turns off the load when an alarm occurs |
| 214.5(W)x124(H)x 400(D)mm; Approx. 6kg | 214.5(W)x124(H)x 400(D)mm; Approx. 7kg |
Reviews (0)
Be the first to review “Instek PEL-3211 Booster unit for PEL-3111 only” Cancel reply
You must be logged in to post a review.

Reviews
There are no reviews yet.