EEC 08540 – AC+DC Power Source, 4 kVA
$3,899.00
Technical Specs
EEC 08540 - AC+DC Power Source, 4 kVA Specs
| INPUT | 8540 |
| Phase | 1Ø2W |
| Voltage | 200 - 240 V ± 10% |
| Max. Current | 30A |
| Power Factor | ≥0.97 at Full load |
| Power Rating | 1Ø2W |
| Max. Current (r.m.s) | 1Ø2W |
| 0 - 310V | 20A @ 200V |
| Inrush Current (peak) | 1Ø2W |
| 0 - 310V | 80A |
| Frequency | 5.0 - 1200 Hz |
| Phase | 1Ø2W |
| THD (Total Harmonic Distortion) | ≤0.3% @ 50/60Hz (Full Resistive Load) ≤1.1% @ 5 -1000Hz (Full Resistive Load) ≤1.2% @1001-1200Hz (Full Resistive Load) |
| Crest Factor | ≥3 |
| Line Regulation | ±0.1V |
| Load Regulation (Hardware) | ± (1% of output +0.5V) @ Resistive Load < 400µS response time |
| Load Regulation (Software) | ±0.2V, <1S response time |
| DC Offset | ≤±30mV (typical) |
| Power Rating | 2400W |
| Max. Current | 0 - 210V |
| 0 - 420V | 24.0A |
| Ripple & Noise (rms) | Range |
| H | < 800mV |
| Ripple & Noise (p-p) | < 7.0Vp-p |
| Voltage (AC) | Range |
| Resolution | 0.1V |
| Accuracy | ±(0.2% of setting + 6 counts) |
| Voltage (DC) | Range |
| Resolution | 0.1V |
| Accuracy | ±(0.2% of setting + 6counts) |
| Frequency | Range |
| Resolution | 0.1Hz at 0.0 - 999.9Hz, 1Hz at 1000 - 1200Hz |
| Accuracy | ±0.03% of setting (≥15Hz) ±0.3% of setting (<15Hz) |
| Start Angle | Range |
| Resolution | 1o |
| Current Hi Limit (OC Fold=OFF) OC Fold Back (OC Fold = ON) | 0 - 155V |
| 0 - 310V | 0.10 - 20.00A |
| Resolution | 0.01 A |
| Accuracy | ± (2.0% of setting + 4 counts) |
| OC Fold Back Response Time | < 1.4S |
| Time | Range |
| Resolution | 0.1h 0.1Min 0.1s 0.1ms |
| Accuracy | ± (0.1% + 0.1 Hour) ± (0.1% + 0.1 Minute) ± (0.1% + 0.1 sec) ± (0.1% + 0.1 ms) |
| Time Unit | Hour, Minute, Second, ms |
| Ramp Up | Range |
| Resolution | 0.1s |
| Accuracy | ± (0.1% + 1 Cycle) at Output frequency ≤ 10Hz ± (0.1% + 0.1 sec) at Output frequency > 10Hz |
| Frequency | Range |
| Resolution | 0.1Hz / 1Hz |
| Accuracy | ±0.1Hz @ 5 - 999.9Hz., ±1Hz @ 1000 - 1200Hz |
| Voltage (AC) | Range |
| Resolution | 0.1V |
| Accuracy | ±(0.2% of reading + 6 counts) at voltage > 5V |
| Voltage (DC) | Range |
| Resolution | 0.1V |
| Accuracy | ±(0.2% of reading + 6 counts) at voltage > 5V |
| Current (AC, DC) | Range |
| Resolution | L |
| H | 0.01A |
| Accuracy | L |
| H | ± (0.5% of reading +12 counts) |
| Current (AC, DC) | Range |
| H | 0 - 5000W |
| Resolution | L |
| H | 1W |
| Accuracy | L |
| H | ± (1% of reading +20 counts) at PF ≥ 0.3 and voltage > 5V |
| Power Factor | Range |
| Resolution | 0.001 |
| Accuracy | W/VA, Calculated and displayed to three significant digits |
| Power Apparent (VA) | Range |
| H | 0 - 5000VA |
| Resolution | L |
| H | 1VA |
| Calculated Formula | V×A, Calculated value |
| Peak Current Measurement | Range |
| Resolution | 0.1A |
| Accuracy | ± (0.5% of reading + 12 counts) |
| Reactive Power Measurement | Range |
| H | 0 - 5000VAR |
| Resolution | L |
| H | 0.01A |
| Calculated Formula | (VA) 2 - (W) 2 |
| Crest Factor Measurement | Range |
| Resolution | 0.01 |
| Calculated Formula | Ap / A |
| Software OCP | ≤110% of full rated current (102% 5 second output shut down >110% of full rated current, <1.5 second output shut down |
| Output Short Shut Down Speed | <1 second |
| Software OPP | ≤110% of full rated current (102% 5 second output shut down, >110% of full rated current, <1.5 second output shut down |
| Software OVP | Over voltage 105% of full rated voltage |
| Software VSENSE OVP | H |
| L | When measurement voltage exceeds setting voltage 5V |
| Software VSENSE LVP | H |
| L | When measurement voltage is lower than setting voltage 5V |
| Hardware OTP | Temperature over 108oC on power component of the PFC and DDC Temperature over 100oC on heatsink of the power amplifier |
| Software RCP (Reverse Current Protection) | When reverse power over 5% of full rated power |
| Hardware FAN FAIL | When fan fails and fan is blocked |
| Dimension by Model (mm) | W |
| H | 176 |
| D | 500 |
| Weight | 28KG |
| Storage Environment | -40° to 75°C |
| Operation Environment | 0-40oC/20-85% RH |
Reviews (0)
You must be logged in to post a review.
Reviews
There are no reviews yet.