SKF TMMA 80 Mechanical 80kN Jaw Puller
$502.00
Technical Specs
SKF TMMA 80 Mechanical 80kN Jaw Puller Specs
| Width of grip external, minimum | 52 mm (2.0 in.) |
| Width of grip external, maximum | 200 mm (7.8 in.) |
| Effective arm length | 200 mm (7.8 in.) |
| Maximum withdrawal force | 80 kN (9.0 ton US) |
| Total weight | 5,7 kg (12.6 lb) |
| Claw height | 9,8 mm (0.39 in.) |
| Claw length | 18 mm (0.7 in.) |
| Claw width | 28 mm (1.1 in.) |
| Hexagon on puller or adapter | 30 mm |
| Hexagon on mechanical spindle | 22 mm |
| Max torque | 175 Nm (125 lbf ft) |
| Diameter nose piece | 26 mm (1.0 in.) |
| Adapter- possible to upgrade to hydraulic version | yes |
| Arm | TMMA 80-1 |
| Spindle with nose piece (and adapter) | TMMA 80-2 |
| Opening mechanism | TMMA 75H/80-3 |
| Puller protection blanket | TMMX 280 |
| Gloves | TMBA G11W |
| Hydraulic spindle | TMHS 75 |
| Spindle grease | LGEV 2/0.035 |
| Tri- section pulling plates | TMMS 50 / TMMS 100 |
Reviews (0)
You must be logged in to post a review.
Reviews
There are no reviews yet.