Rigol DSG3136B-IQ – 13.6 GHz RF Signal Generator with IQ Modulation/Baseband Output
$9,944.00
Technical Specs
Rigol DSG3136B-IQ - 13.6 GHz RF Signal Generator with IQ Modulation/Baseband Output Specs
| Frequency Range | 9 kHz to 13.6 GHz |
| Frequency resolution | 0.01 Hz |
| Setting time[1] | < 10 ms (typ.) |
| Band | Frequency range |
| 1 | f < 227.5 MHz |
| 2 | 227.5 MHz |
| 3 | 455 MHz ≤ f < 910 MHz |
| 4 | 910 MHz ≤ f < 1820 MHz |
| 5 | 1820 MHz ≤ f ≤ 3600 MHz |
| 6 | 3600 MHz < f ≤ 6500 MHz |
| 7 | 6500 MHz < f ≤ 13600 MHz |
| Reference frequency | 10 MHz |
| Initial calibration accuracy | ≤ 0.1 ppm |
| Temperature stability | Temperature range: 0℃ to 50℃ , reference to 25℃ |
| Aging rate | < 1 ppm/year |
| Internal reference frequency output | Frequency |
| Level | +5 dBm to +10 dBm |
| External reference frequency input | Frequency |
| Level | 0 dBm to +10 dBm |
| Maximum deviation | ±5 ppm |
| Sweep type | Step sweep (equally or logarithmically spaced frequency steps) List sweep (list with arbitrary frequency steps) |
| Sweep mode | Single, continuous |
| Sweep range | Full frequency range |
| Sweep shape | Triangle, ramp |
| Step change | Linear or logarithmic |
| Number of points | Step sweep |
| List sweep | 1 to 6001 |
| Dwell time | 20 ms to 100 s |
| Trigger mode | Auto, key, external, bus (USB and LAN) |
| Harmonic | CW mode |
| 2 MHz < f ≤ 6.5GHz, level ≤ +13 dBm | < -30 dBc |
| 6.5 GHz < f ≤ 12 GHz, level ≤ +10 dBm | < -30 dBc |
| 12 GHz < f ≤ 13.6 GHz, level ≤ 2 dBm | < -30 dBc |
| Sub-harmonic[2] | CW mode |
| 3.6 GHz < f ≤ 13.6 GHz | < -60 dBc, < -70 dBc（typ.） |
| Non-harmonic | CW mode, level > -10 dBm, carrier offset > 10 kHz |
| 100 kHz ≤ f ≤ 1.5 GHz | < -60 dBc, < -70 dBc (typ.) |
| 1.5 GHz < f ≤ 3.6 GHz | < -54 dBc, < -64 dBc (typ.) |
| 3.6 GHz < f ≤ 6.5 GHz | < -48 dBc, < -58 dBc (typ.) |
| 6.5 GHz < f ≤ 13.6 GHz | < -42 dBc, < -52 dBc (typ.) |
| SSB phase noise | CW mode, carrier offset = 20 kHz, 1 Hz measurement bandwidth |
| f=1 GHz | < -110 dBc/Hz, < -116 dBc/Hz (typ.) |
| f=6.5 GHz | < -98 dBc/Hz, < -102 dBc/Hz (typ.) |
| f=13.6 GHz | < -92 dBc/Hz, < -96 dBc/Hz (typ.) |
| Residual FM | CW mode, RMS value at f = 1 GHz |
| 0.3 kHz to 3 kHz | < 10 Hz rms, < 5 Hz rms (typ.) |
| 0.03 kHz to 20 kHz | < 50 Hz rms, < 10 Hz rms (typ.) |
| Carrier frequency range | 50 MHz ≤ f ≤ 6.5 GHz |
| Modulation source | External, internal |
| Bandwidth (RF) | External modulation |
| Baseband (I or Q) | ≤ 60 MHz (nom.) |
| RF (I + Q) | ≤ 120 MHz (nom.) |
| Baseband (I or Q) | ≤ 30 MHz (nom.) |
| RF (I + Q) | ≤ 60 MHz (nom.) |
| Carrier suppression[1] | 50 MHz ≤ f ≤ 6 GHz |
| Image sideband suppression[1,2] | 50 MHz ≤ f ≤ 6 GHz |
| External I/Q input | VSWR |
| Full range input | I2Q2 = 0.5Vrms |
| EVM[1] | 16 QAM, root cosine filter (α = 0.22), 4 MSps, output level ≤ +4 dBm |
| QPSK, root cosine filter (α = 0.22), 4 MSps, output level ≤ +4 dBm | ≤ 2%rms (typ.) |
| EVM[1] | EVM[1] CDMA2000/1xEV-D0, 1.2288 Mcps, frequency: 800 to 900 MHz, 1800 to 1900 MHz, output level ≤ +4 dBm |
| ACPR | ≥ 70 dB |
| Output impedance | 50 Ω (nom.) |
| Output voltage | Setting range |
| Resolution | 1 mV |
| Frequency response | Reference: 1 MHz |
| ≤ 30 MHz | < 1 dB (nom.) |
| I/Q imbalance | Amplitude |
| ≤ 30 MHz | < 0.2 dB (nom.) |
| Nonlinear phase | ≤ 10 MHz |
| ≤ 30 MHz | 500 ps (nom.) |
| SFDR | Sine |
| Waveform memory | Waveform length |
| Resolution | 14 bits |
| Loading time (1 Msample) | < 10 s[1] (nom.) |
| Non-volatile memory | 96 MB (nom.) |
| Sample rate | Setting range |
| Resolution | 0.01 Hz |
| Trigger | Trigger mode |
| Operation mode | Retrig, arm auto, arm retrig, single |
| Setting range | 0 to (216 - 1) |
| Resolution | 1 |
| Setting range | 0 to (216 - 1) |
| Resolution | 1 |
| External trigger pulse width | > 20 ns (nom.) |
Reviews (0)
You must be logged in to post a review.
Reviews
There are no reviews yet.