Rigol DSG830 RF Signal Generator, 9 kHz to 3 GHz
$2,456.00
Technical Specs
Rigol DSG830 RF Signal Generator, 9 kHz to 3 GHz Specs
| DSG815 | DSG830 |
| Frequency range | 9 kHz to 1.5 GHz |
| Frequency resolution | 0.01 Hz |
| Setting time[1] | < 10 ms (typ.) |
| Band | Frequency range |
| 1 | f < 227.5 MHz |
| 2 | 227.5 MHz ≤ f < 455 MHz |
| 3 | 455 MHz ≤ f < 910 MHz |
| 4 | 910 MHz ≤ f < 1820 MHz |
| 5 | 1820 MHz ≤ f ≤ 3000 MHz |
| Reference frequency | 10 MHz |
| Temperature stability | In temperature range 0℃ to 50℃ , reference to 25℃ |
| With option OCXO-B08 | < 5 ppb |
| Aging rate | < 1 ppm/year |
| With option OCXO-B08 | < 30 ppb/year |
| Internal reference frequency output | Frequency |
| Level | +5 dBm to +10 dBm |
| External reference frequency input | Frequency |
| Level | 0 dBm to +10 dBm |
| Maximum deviation | ±5 ppm |
| Sweep type | Step sweep (equally or logarithmically spaced frequency steps) List sweep (list with arbitrary frequency steps) |
| Sweep mode | Single, continuous |
| Sweep range | Full frequency range |
| Sweep shape | Triangle, ramp |
| Step change | Linear or logarithmic |
| Number of points | Step sweep |
| List sweep | 1 to 6001 |
| Dwell time | 20 ms to 100 s |
| Trigger mode | Auto, key, external, bus (USB, LAN) |
| DSG815 | DSG830 |
| Harmonic | CW mode, 1 MHz ≤ f ≤ 3 GHz, level ≤ +13 dBm |
| Non-harmonic | CW mode, level > -10 dBm, carrier offset > 10 kHz |
| 100 kHz ≤ f ≤ 1.5 GHz | < -60 dBc, < -70 dBc (typ.) |
| 1.5 GHz < f ≤ 3 GHz | < -54 dBc, < -64 dBc (typ.) |
| SSB phase noise | CW mode, carrier offset = 20 kHz, 1 Hz measurement bandwidth |
| 100 kHz ≤ f ≤ 1.5 GHz | < -100 dBc/Hz, < -105 dBc/Hz (typ.) |
| 1.5 GHz < f ≤ 3 GHz | < -94 dBc/Hz, < -99 dBc/Hz (typ.) |
| Residual FM | CW mode, RMS value at f = 1 GHz |
| 0.3 kHz to 3 kHz | < 10 Hz rms, < 5 Hz rms (typ.) |
| 0.03 kHz to 20 kHz | < 50 Hz rms, < 10 Hz rms (typ.) |
| Specification level range | Setting range |
| Maximum output level[1] | 9 kHz ≤ f < 100 kHz |
| 100 kHz ≤ f ≤ 3 GHz | +13 dBm |
| Minimum output level | 9 kHz ≤ f ≤ 100 kHz |
| 100 kHz < f ≤ 3 GHz | -110 dBm |
| Setting Resolution | 0.01 dB |
| Level uncertainty | Temperature range: 20℃ to 30℃ |
| +13 dBm to -60 dBm | -60 dBm to -110 dBm |
| 100 kHz ≤ f ≤ 3 GHz | ≤ 0.9 dB, ≤ 0.5 (typ.) |
| VSWR[2] | 1 MHz ≤ f ≤ 3 GHz |
| Setting time[3] | Fixed frequency, temperature range: 20℃ to 30℃ |
| Max. reverse power | Max. DC voltage |
| 1 MHz < f ≤ 3 GHz | 1 W |
| Sweep type | Step sweep (equally spaced level steps) List sweep (list with arbitrary level steps) |
| Sweep mode | Single, continuous |
| Sweep range | Full level range |
| Sweep shape | Triangle, ramp |
| Step change | Linear |
| Number of points | Step sweep |
| List sweep | 1 to 6001 |
| Dwell time | 20 ms to 100 s |
| Trigger mode | Auto, key, external, bus (USB, LAN) |
| Waveform | Sine, square |
| Frequency range | Sine |
| Square | DC to 20 kHz |
| Resolution | 0.01 Hz |
| Frequency error | The same with that of the RF reference source |
| Voltage range | AC |
| DC | -3 V to 3 V |
| Voltage resolution | 2 mV |
| AM | FM |
| AM | - |
| FM | ○ |
| ØM | ○ |
| Pulse mod. (opt.) | △ |
| Modulation source | Internal, external |
| Modulation depth[2] | 0% to 100% |
| Resolution | 0.1% |
| Setting uncertainty | fmod = 1 kHz |
| Distortion | fmod = 1 kHz, m < 30%, level = 0 dBm |
| Modulation frequency response | m < 80%, DC/10 Hz to 100 kHz |
| Modulation source | Internal, external |
| Max. deviation | N × 1 MHz (nom.) |
| Resolution | < 0.1% of the deviation or 0.01 rad, take the greater one (nom.) |
| Setting uncertainty | fmod = 1 kHz, internal modulation |
| Distortion | fmod = 1 kHz, deviation = N × 50 kHz |
| Modulation frequency response[3] | DC/10 Hz to 100 kHz |
| Modulation source | Internal, external |
| Max. deviation | N × 5 rad (nom.) |
| Resolution | < 0.1% of the deviation or 0.01 rad, take the greater one (nom.) |
| Setting uncertainty | fmod = 1 kHz, internal modulation |
| Distortion | fmod = 1 kHz, deviation = N × 5 rad |
| Modulation frequency response[4] | DC/10 Hz to 100 kHz |
| Modulation source | External, internal |
| On/off ratio | 100 kHz ≤ f < 3 GHz |
| Rise/fall time (10%/90%) | < 50 ns, 10 ns (typ.) |
| Pulse repetition frequency | DC to 1 MHz |
| Pulse mode | Single pulse, pulse train (option DSG800-PUG) |
| Pulse period | Setting range |
| Resolution | 10 ns |
| Pulse width | Setting range |
| Resolution | 10 ns |
| Trigger delay | Setting range |
| Resolution | 10 ns |
| Trigger mode | Auto, external trigger, external gate, key, bus (USB, LAN) |
| Pulse train generator | Number of pulse patterns |
| On/off time range | 20 ns to 170 s |
| Number of repetitions per pattern | 1 to 256 |
| RF output | Impedance |
| Connector | N female |
| Internal modulation generator (LF) output | Impedance |
| Connector | BNC female |
| External trigger input | Impedance |
| Connector | BNC female |
| Trigger voltage | 3.3 V TTL level |
| Signal valid output | Connector |
| Output voltage | 0 V/3.3 V (nom.) |
| Pulse input or output | Impedance |
| Input/output voltage | 0 V/3.3 V (nom.) |
| External modulating signal input | Impedance |
| Coupling | Coupling |
| Sensitivity | 1 V peak-peak for indicated modulation depth or deviation (nom.) |
| Connector | BNC female |
| 10MHz input (external frequency reference input) | Impedance |
| Connector | BNC female |
| 10MHz output (external frequency reference output) | Impedance |
| Connector | BNC female |
| USB host | Connector |
| Protocol | Version 2.0 |
| USB device | Connector |
| Protocol | Version 2.0 |
| LAN | LXI Core 2011 Device |
| Type | TFT LCD |
| Resolution | 320 (RGB) × 240 |
| Size | 3.5 inches |
| Mass storage | Flash non-volatile memory (internal); USB storage device (not supplied) |
| Data storage space | Flash non-volatile memory (internal) |
| Input voltage range, AC | 100 V to 240 V (nom.) |
| AC frequency range | 45 Hz to 440 Hz |
| Power consumption | With all the options |
| Certificate of conformity | CE |
| EMC | Conform to EMC instruction (2014/30/EU), Conform to or exceed IEC61326-1: 2013/EN61326-1: 2013 Group 1 Class A standard |
| IEC 61000-4-2:2008/EN 61000-4-2 | ±4.0 kV (contact discharge), ±8.0 kV (air discharge) |
| IEC 61000-4-3:2002/EN 61000-4-3 | 3 V/m (80 MHz to 1 GHz) 3 V/m (1.4 GHz to 2 GHz) 1 V/m (2.0 GHz to 2.7 GHz) |
| IEC 61000-4-4:2004/EN 61000-4-4 | 1 kV power cable |
| IEC 61000-4-5:2001/EN 61000-4-5 | 0.5 kV (Phase to Neutral) 1 kV (Phase to PE) 1 kV (Neutral to PE) |
| IEC 61000-4-6:2003/EN 61000-4-6 | 3 V, 0.15 MHz to 80 MHz |
| IEC 61000-4-8:2009 | 3 A/m (50 Hz, 60 Hz) |
| IEC 61000-4-11:2004/EN 61000-4-11 | Voltage dip: 0% UT during half cycle 0% UT during 1 cycle 70% UT during 25 cycles Short interruption: 0% UT during 250 cycles |
| Safety regulation | Conform to: IEC 61010-1:2010 (Third Edition)/EN 61010-1:2010, UL 61010-1:2012 R4.16 and CAN/CSA-C22.2 NO. 61010-1-12+ GI1+ GI2 |
| Temperature | Operating temperature range |
| Storage temperature range | -20℃ to 70℃ |
| Humidity | 0℃ to 30℃ |
| 30℃ to 40℃ | ≤ 75% rel. humidity |
| 40℃ to 50℃ | ≤ 45% rel. humidity |
| Altitude | Operating height |
| (W × H × D) | 261.5 mm × 112 mm × 318.4 mm (10.30 inch × 4.41 inch × 12.54 inch) |
| Recommended calibration interval | 18 months |
Reviews (0)
You must be logged in to post a review.
Reviews
There are no reviews yet.