PIE 311Plus Diagnostic RTD & Milliamp Calibrator
$1,492.00
Technical Specs
PIE 311Plus Diagnostic RTD & Milliamp Calibrator Specs
| Operating Temperature Range | -25 to 60 °C (-10 to 140 °F) |
| Relative Humidity Range | 10 % ≤RH ≤90 % (0 to 35 °C), Non-condensing, 10 % ≤RH≤ 70 % (35 to 60 °C), Non-condensing |
| Temperature Drift | ± 0.01% of span outside of 23°C ±10 °C (73°C ±18 °F) |
| Size | 5.63 x 3.00 x 1.60 in, 143 x 76 x 41 mm (L x W x H) |
| Weight | 12.1 ounces, 0.34 kg (including boot & batteries) |
| Batteries | Four “AA” Alkaline 1.5V (LR6) |
| Battery Life | 50 Hours thermocouple, XX Hours milliamp |
| Isolation | Voltage 60V rms between all milliamp functions and Source/ Read RTD/Ohms |
| Normal Mode Rejection | 50/60 Hz, 50 dB |
| Common Mode Rejection | 50/60 Hz, 120 dB |
| Optional NiMh Rechargeable battery kit | Charger, four NiMh batteries [Part # 020-0103] |
| Low Battery | Low battery indication with nominal 1 hour of operation left |
| Protection against misconnection | Over-voltage protection to 60 V dc (rated for 30 seconds) |
| Display | High contrast graphic liquid crystal display. LED backlighting for use in low lit areas. |
| Ranges and Resolution | 0.000 to 24.000 mA or -25.00 to 125.00% of 4-20 mA |
| Accuracy | ≤ ± (0.02 % of Reading + 0.003 mA) |
| Voltage burden | ≤ 2V at 24 mA |
| Overload/Current limit protection | 25 mA nominal |
| Ranges and Resolution | 0.000 to 24.000 mA or -25.00 to 125.00% of 4-20 mA |
| Accuracy | ≤ ± (0.02 % of Reading + 0.003 mA) |
| Loop compliance voltage | ≥ 24 DCV @ 20.00mA |
| Loop drive capability | 1200 Ω at 20 mA for 15 hours nominal; 950 Ω with Hart Resistor or leak detection running |
| Accuracy | Same as Source/Power & Measure |
| Voltage burden | ≤ 2V at 20 mA |
| Overload/Current limit protection | 24 mA nominal |
| Loop voltage limits | 2 to 60 VDC (fuse-less protected from reverse polarity connections) |
| Accuracy | ±(0.015% of Reading + 0.05 Ohms) |
| Resistance Ranges | 0.00 to 401.00, 0.0 to 4010.0 Ohms |
| Excitation Current | 0.9 mA to 401 Ohms, 0.4 mA to 4010 Ohms (nominal) |
| PIE 510B | Lowest cost unit. Source only, 1 RTD type |
| PIE 511B | Source only, 10 RTD types |
| PIE 211 | Source and Read, 9 RTD types. Patented auto RTD wire detection finds broken wires. Comes with rubber boot and 2 pocket hands free case |
| PIE 311 | 9 RTD types with secondary display of ohms. Higher accuracy. Patented auto RTD wire detection finds broken wires. Comes with rubber boot and 2 pocket hands free case. |
| PIE 311Plus | 12 RTD types with secondary display of ohms. Patented auto RTD wire detection finds broken wires. Includes full milliamp loop calibrator(model 334Plus) which has patented current leak detection feature. Comes with rubber boot and 2 pocket hands free case |
Reviews (0)
You must be logged in to post a review.
Reviews
There are no reviews yet.