SurgeX SA20AR Axess Ready IP Enabled Standalone Surge Elim
$961.00
Technical Specs
SurgeX SA20AR Axess Ready IP Enabled Standalone Surge Eliminator, 2 Outlets, 20A / 120V Specs
| Description | Axess Ready IP Enabled Standalone Surge Eliminator |
| Load Rating | 20 Amps @ 120 Volts |
| Power Requirement (no load) | 10 watts |
| Surge Let-Through Voltage (6000-volt surge) | 0 volts |
| UL 1449 Adjunct Classification Test Results | 1000 surges, 6000 Volts, 3000 Amps, B3 pulse |
| Measured suppressed voltage | 170 Volts, no failures |
| Federal Guidelines | Grade A, Class 1, Mode 1 (CID A-A-55818) |
| Maximum Applied Surge Pulse Joule Rating | Unlimited, due to current limiting (8 x 20 µs) |
| EMI/RFI Filter, Normal Mode (50-ohm load) | 40 dB @ 100 kHz; 50 dB @ 300 kHz; 50 dB @ 3 MHz; 50 dB @ 30 MHz |
| EMI/RFI Filter, Common Mode (50-ohm load) | 18 dB @ 300 kHz; 30 dB @ 1 MHz; 50 dB @ 5 MHz; 50 dB @ 20 MHz |
| Maximum Applied Surge Voltage | 6000 Volts |
| Maximum Applied Surge Current | Unlimited, due to current limiting* |
| Endurance (C62.41-1991 Category B3 pulses) | Unlimited, due to current limiting* |
| Dimensions | 4" H x 10.2" W x 4.2" D (10.2 x 25.9 x 10.7 cm) |
| Weight | 8.5 lbs (3.8 kg) |
| Temperature Range | 5º to 35º C |
| Humidity Range | 5% to 95% R.H., non-condensing |
| Agency Listings | ETL and cETL certified to (UL 1449; CSA C22.2 No.8-M1986, R2000) UL 1283 |
| Warranty | Limited lifetime and limited five (5) years connected protection |
Reviews (0)
You must be logged in to post a review.
Reviews
There are no reviews yet.