Mark-10 MTT01-12 – Cap torque tester, 12 lbFin / 192 ozFin / 14 kgFcm / 135 Ncm / 1.35 Nm
$1,025.00
Technical Specs
Mark-10 MTT01-12 - Cap torque tester, 12 lbFin / 192 ozFin / 14 kgFcm / 135 Ncm / 1.35 Nm Specs
| Accuracy | ±0.3% of full scale |
| Sampling rate | 7,000 Hz |
| Power | AC or rechargeable battery. Multi-step low battery indicator is displayed, tester shuts off automatically when power is too low. |
| Battery Life | Backlight on: up to 7 hours of continuous use |
| Backlight off | up to 24 hours of continuous use |
| Measurement units | ozFin, lbFin, kgFcm, Nm, Ncm |
| Outputs | USB / RS-232: Configurable up to 115,200 baud. |
| Mitutoyo | Serial BCD suitable for all Mitutoyo SPC-compatible devices. |
| Analog | ±1 VDC, ±0.25% of full scale at capacity. |
| General purpose | Three open drain outputs, one input. |
| Set points | Three open drain lines. |
| Configurable Settings | Digital filters, outputs, automatic output/data storage/zero, automatic shutoff, default settings, key tones, backlight, audio alarms, passwords, calibration |
| Safe overload | 150% of full scale (display shows “OVER” at 110% and above) |
| Weight | 8.4 lb [3.8 kg] |
| Included items | Set of 4 1.25" length posts, universal voltage AC adapter, battery, quick-start guide, USB cable, resource CD (USB driver, MESURTM Lite software, MESURTMgauge DEMO software, and user’s guide), and NIST-traceable certificate of calibration (data is available for an additional charge). |
Reviews (0)
You must be logged in to post a review.
Reviews
There are no reviews yet.