UE Systems UP100KT – Ultraprobe 100 Ultrasonic Detection Kit
$1,037.00
Technical Specs
UE Systems UP100KT - Ultraprobe 100 Ultrasonic Detection Kit Specs
| Construction: | Handheld ABS pistol type ultrasonic processor, stainless steel sensor enclosures |
| Circuitry: | SMD/Solid State hybrid heterodyne receiver |
| Frequency Response: | Peak response: 36-44 kHz |
| Indicator: | 10 segment LED Bar Graph (red) |
| Sensitivity Selection: | 8 position precision attenuation |
| Power: | 9 Volt Alkaline Battery |
| Low Battery Voltage Indicator: | LED |
| Headset: | Noise isolating type: Double headset wired monophonic. Impedance, 16 ohms. Over 23 dB of noise attenuation. Meets or exceeds ANSI specifications and OSHA standards. For hard hat use. |
| Probes: | Scanning Module (SCM-1), Stainless Steel Unisonic (single transducer) piezo electric crystal type; Stethoscope/Contact Module (STM-1), Stainless Steel plug-in type with 14 cm (5.5”), Stainless Steel Waveguide Rubber Focusing Probe Shields stray ultrasonic signals and focuses detected signals |
| Transmitter: | Patented warble tone transmission |
| Response time: | Response time: 300 msec |
| Ambient Operating Temp. Range: | 0 - 50 °C (32 °F - 120 °F) |
| Relative Humidity: | 10-95% non-condensing at up to 30 °C (86 °F) |
| Storage Temperature: | 18 °C - 54 °C (0 °F - 130 °F) |
| Warranty: | 1-year parts/labor standard, (details available on request) 5 years with completed warranty registration card |
| Dimensions: | 13.3 x 5 x 20.3 cm (5.25” x 2” x 8”) |
| Weight: | 0.3 kg (11 oz) |
| Carrying Case: | Nylon Cordura soft carrying case |
Reviews (0)
You must be logged in to post a review.
Reviews
There are no reviews yet.