Hioki SP7001-95 Non-Contact CAN Sensor (1 x SP7001, 1 x
$2,389.00
Technical Specs
Hioki SP7001-95 - Non-Contact CAN Sensor (1 x SP7001, 1 x SP7100, 1 x SP9200) Specs
| Detection method | Capacitive-coupled signal detection *No bare-wire connections |
| Detectable cables | AVS/AVSS-compliant cables External diameter: 1.2 to 2.0 mm (0.05 to 0.08 in) |
| Number of channels | 1CH (SP7150), 2CH (SP7100) |
| Compatible communications speeds | SP7001: CAN, CAN FD 125kbit/s to 3Mbit/s SP7002: CAN 125kbit/s to 1Mbit/s |
| Total delay time | 130ns (typical) |
| CAN terminal resistance | 60 Ω (typical), built-in |
| Signal output connector | D-sub 9-pin female (CH1, CH2) |
| Operating temperature and humidity range | Temperature: -40°C to 85°C (-40°F to 185°F) Humidity: -40°C to 60°C (-40°F to 140°F), 80% RH or less (non-condensing) 60°C to 85°C (140°F to 185°F), 60% RH or less (non-condensing) |
| Storage temperature and humidity range | -40°C to 85°C (-40°F to 185°F), 80% RH or less (non-condensing) |
| Compliant standards | Safety: EN 61010, EMC: EN 61326 |
| Vibration resistance | JIS D 1601:1995 5.3 (1) Class 1: passenger cars; conditions: Class A equivalent 4h along X-axis and 2h along Y- and Z-axes at a vibration acceleration of 45 m/s2 (4.6G) |
| GND terminal | Banana input terminal |
| Power supply | When using SP7001-95 or SP7150 USB bus power (DC 5V) Maximum rated power: 8VA Z1013 AC Adapter Rated supply voltage: 100V to 240V AC Maximum rated power: 6VA (including AC adapter), 1VA (product only) When using SP7001-90, SP7002-90 or SP7100 Z1008 AC Adapter Rated supply voltage: 100V to 240V AC Maximum rated power: 8 VA (including AC adapter), 3VA (product only) External power supply Rated supply voltage: 10V to 30V DC Maximum rated power: 3VA |
| Product warranty | SP7001, SP7002, SP7100, SP7150: 3 years |
Reviews (0)
You must be logged in to post a review.
Reviews
There are no reviews yet.