Chroma 11050 HF LCR Meter - 10MHz
$9,276.00
Chroma 11021L 1k-50kHz LCR Meter
$1,170.00
Chroma 11022 50-100kHz LCR Meter
$3,270.00
Technical Specs
Chroma 11022 - 50-100kHz LCR Meter Specs
| Model | 11022 |
| L,C, R,|Z|, Q, D, ESR, X, θ | L,C, R,|Z|, Q, D, ESR, X, θ DCR4, M, Turns Ratio, L2, DCR2 |
| Level | 10 mV~1V , step 10 mV; ±(10% + 3 mV) |
| Frequency | 50Hz, 60Hz, 100Hz, 120Hz, 1kHz, 10kHz, 20kHz, 40kHz, 50kHz, 100kHz ; ±0.01% |
| Output Impedance (Nominal Value) | Constant 107X : 25Ω ; Constant 320X : 100Ω ; Constant 106X : 2Ω,for Z≥10Ω, 100mA (1V setting) for reactive load≤10Ω ; Constant 102X : 25Ω, for Z<1Ω, 100Ω for else |
| DC Bias Current (Freq. ? 1kHz) | - - |
| C (Capacitance) | 0.001pF ~ 1.9999F |
| L, M, L2 (Inductance) | 0.001µH ~ 99.99k |
| Z (Impedance), ESR | 0.01mΩ ~99.99MΩ |
| Q (Quality Factor) ; D (Dissipation Factor) | 0.0001 ~ 9999 |
| ?(Phase Angle) | -180.00° ~ +180.00° |
| Turns Ratio (Np:Ns) | - |
| DCR | - |
| Basic Measurement Accuracy *1 | ±0.1% |
| Measurement Time (Fast) *2 | 21ms |
| Interface | handler (50pin), GPIB, RS-232 |
| Output Signal | Bin-sorting & HI/GO/LOW judge |
| Comparator | Upper/Lower limits in value |
| Bin Sorting | 8/99 bin limits in %, ABS |
| Trigger Delay | 0~9999ms |
| Correction | Open/ Short zeroing, load correction |
| Averaging | 1~256 programmable |
| Cable Length | 0m, 1m, 2m, 4m |
| Test Sig. Level Monitor | Voltage, Current |
| Equivalent Circuit mode | Series, Parallel |
| Memory (Store/ Recall) | 50 instrument setups |
| Trigger | Internal, Manual, External, BUS |
| Operation Environment | Temperature : 10°C~40°C Humidity : < 90 % R.H. |
| Power Consumption | 65VA max |
| Power Requirements | 90 ~ 132Vac or 180 ~ 264Vac, 47 ~ 63Hz |
| Dimension (H x W x D) | 100 x 320 x 347.25 mm / 3.94 x 12.6 x 13.67 inch |
| Weight | 5.5 kg / 12.11 lbs |
Reviews (0)
You must be logged in to post a review.
Reviews
There are no reviews yet.