Hioki IM3536 LCR Meter, DC 4Hz-8MHz, 1ms, 6 Digits
$3,371.00
Technical Specs
Hioki IM3536 - LCR Meter, DC 4Hz-8MHz, 1ms, 6 Digits, Exit I/O/USB/LAN/GP-IB/RS-232C, IM3500 Series Specs
| Measurement modes | LCR mode, Continuous measurement mode |
| Measurement parameters | Z, Y, θ, X, G, B, Q, Rdc (DC resistance), Rs (ESR), Rp, Ls, Lp, Cs, Cp, D (tanδ), σ, ε |
| Measurement range | 100 mΩ to 100 MΩ, 10 ranges (All parameters are determined according to Z) |
| Display range | Z: 0.00 m to 9.99999 GΩ, Rs, Rp, Rdc, X: ±(0.00 m to 9.99999 GΩ) G, B: ±(0.000 n to 9.99999 GS), Ls, Lp: ±(0.00000 μ to 9.99999 GH), Cs, Cp: ±(0.0000 p to 9.99999 GF), Y: 0.000 n to 9.99999 GS, θ : ±(0.000° to 999.999°), Q: ±(0.00 to 9999.99), D : ±(0.00000 to 9.99999), Δ % : ±(0.000 % to 999.999%) |
| Basic accuracy | Z ±0.05% rdg. θ: ±0.03° (represestative value, Measurable range: 1 mΩ to 200 MΩ) |
| Measurement frequency | 4 Hz to 8 MHz (10 mHz to 100 Hz steps) |
| Measurement signal level | [Normal mode: V mode/CV mode] 4 Hz to 1.0000 MHz: 10 mV to 5 V (maximum 50 mA) 1.0001 MHz to 8 MHz: 10 mV to 1 V (maximum 10mA) [Low impedance high accuracy mode: V mode/CV mode] 4 Hz to 1.0000 MHz: 10 mV to 1 V (maximum 100 mA) [Normal mode: CC mode] 4 Hz to 1.0000 MHz: 10 μA to 50 mA (maximum 5 V) 1.0001 MHz to 8 MHz: 10 μA to 10 mA (maximum 1 V) [Low impedance high accuracy mode: CC mode] 4 Hz to 1.0000 MHz: 10 μA to 100 mA (maximum 1 V) DC resistance measurement] Measurement signal level: Fixed at 1 V |
| DC bias measurement | Generating range: DC voltage 0 V to 2.50 V (10mV resolution) In low Z high accuracy mode: 0 V to 1 V (10 mV resolution) |
| Output impedance | Normal mode: 100 Ω, Low impedance high accuracy mode: 10 Ω |
| Display | 5.7-inch color TFT with touch panel |
| Functions | Comparator, BIN measurement (10 categories for 2 measurement parameters), Trigger function, Open/short compensation, Contact check, Panel loading/saving, Memory function |
| Interfaces | EXT. I/O( HANDLER) ,USB, USB flash drive, LAN, GP-IB, RS-232C, BCD |
| Power supply | 100 to 240 V AC, 50/60 Hz, 50 VA max. |
| Dimensions and mass | 330 mm (12.99 in) W × 119 mm (4.69 in) H × 230 mm (9.06 in) D, 4.2 kg (148.1 oz) |
| Accessories | Power cord ×1, Instruction manual ×1, LCR application disc (Communications user manual) ×1 |
| Input type | Optocoupler-isolated, non-voltage contact inputs (current sink, active-low) |
| Input asserted (on) voltage | 0.9 V or less |
| Input de-asserted (off) voltage | OPEN or 5 V to 24 V |
| Input asserted (on) current | 3 mA/ch |
| Maximum applied voltage | 30 V |
| Output type | Isolated NPN open-collector outputs (current sink, active-low) |
| Maximum load voltage | 30V |
| Maximum output current | 50 mA/ch |
| Residual voltage | 1 V (10 mA), 1.5 V (50 mA) |
| Output voltage | 4.5 V to 5.0 V |
| Maximum output current | 100 mA |
| External power input | none |
| Measurement parameters | Z Impedance Y Admittance θ Phase angle X Reactance G Conductance B Susceptance Q Q-factor Rdc DC resistance Rs Equivalent series resistance (ESR) Rp Equivalent parallel resistance Ls Equivalent series inductance Lp Equivalent parallel inductance Cs Equivalent series capacitance Cp Equivalent parallel capacitance D Loss factor tan δ σ Conductivity ε Permittivity |
| Display range | Z 0.00 m to 9.99999 GΩ Y 0.000 n to 9.99999 GS θ ±(0.000° to 999.999°) X ±(0.00 m to 9.99999 GΩ) G ±(0.000 n to 9.99999 GS) B ±(0.000 n to 9.99999 GS) Q ±(0.00 to 9999.99) Rdc ±(0.00 m to 9.99999 GΩ Rs ±(0.00 m to 9.99999 GΩ) Rp ±(0.00 m to 9.99999 GΩ) Ls ±(0.00000 μ to 9.99999 GH) Lp ±(0.00000 μ to 9.99999 GH) Cs ±(0.0000 p to 9.99999 GF) Cp ±(0.0000 p to 9.99999 GF) D ±(0.00000 to 9.99999) Δ% ±(0.000% to 999.999%) σ ±(0.00000 to 999.999 G) ε ±(0.00000 to 999.999 G) |
| Measurable range | 1 mΩ to 200 MΩ |
| Output impedance | Normal mode: 100 Ω, Low impedance high accuracy mode: 10Ω |
| Range | 4 Hz to 8 MHz |
| Resolution | 4.00 Hz to 999.99 Hz …………… 10 mHz steps .0000 kHz to 9.9999 kHz …… 100 mHz steps 10.000 kHz to 99.999 kHz …… 1 Hz steps 100.00 kHz to 999.99 kHz …… 10 Hz steps 1.0000 MHz to 8.0000 MHz …… 100 Hz steps |
| Accuracy | ±0.01% of setting or less |
| Range | [Normal mode] 4 Hz to 1.0000 MHz: 10 mV to 5 V (maximum 50 mA) 1.0001 MHz to 8 MHz: 10 mV to 1 V (maximum 10mA) [Low impedance high accuracy mode] 4 Hz to 1.0000 MHz: 10 mV to 1 V (maximum 100 mA) |
| Resolution | 10 mV to 1.000 V …… 1 mV steps |
| Range | [Normal mode] 4 Hz to 1.0000 MHz: 10 μA to 50 mA (maximum 5 V) 1.0001 MHz to 8 MHz: 10 μA to 1 mA (maximum 1 V) [Low impedance high accuracy mode] 4 Hz to 1.0000 MHz: 10 μA to 100 mA (maximum 1 V) |
| Resolution | 10 μA steps |
| Monitor function | Monitor voltage range: 0.000 V to 5.000 V Monitor current range: 0.000 mA to 100.0 mA |
| DC resistance measurement | Measurement signal level: Fixed at 1 V |
| DC bias measurement | Generating range: DC voltage 0 V to 2.50 V (10mV resolution) In low Z high accuracy mode: 0 V to 1 V (10 mV resolution) |
| Measurement modes | LCR mode: Measurement using a single set of conditions. Continuous measurement mode: Continuous measurement using previously saved conditions |
| Measurements | Bin measurement: 10 categories for 2 measurement parameters Judgment method: Set as absolute values, percentage, or deviation percentage |
| Display | Zoom display function: Enlarged display of measured values Number of display digits setting: Allows you to set the number of display digits for measured values for each measurement parameter. (Valid setting range: 3 to 6 digits) |
| Measurements | Performs continuous measurement using measurement condi- tions that have been saved using the panel save function. Measurement is started by an external trigger (any of the three types described below) |
| Maximum number of measurements | 60 |
| Measurement speed | FAST/MED/SLOW/SLOW2 |
| Averaging | Valid setting range: 1 to 256 (in steps of 1) |
| Basic accuracy | Z: 0.05% rdg. θ: 0.03° (representative value) |
| Guaranteed accuracy range | 1 mΩ to 200 MΩ (impedance) |
| Guaranteed accuracy period | 1 year |
| Warm-up time | 60 minutes |
| Terminal structure | 4-terminal structure |
| Trigger function | Uses a specific signal to time the start of measurement. [Trigger types] Internal trigger: Automatically generates a trigger signal internally to repeat measurement. External trigger: Allows you to control the instrument , s measurement operation by inputting a trigger signal from an external device (trigger sources: manual, communica- tions commands, EXT. I/O). [Trigger delay] Sets the delay time from trigger input to measurement. Setting range: 0.0000 s to 9.9999 s [Trigger synchronous output] Outputs the measurement signal after trigger input and ap- plies it to the sample during measurement only. Allows you to set a wait time until data is acquired. Setting range: 0.0000 s to 9.9999 s |
| Compensation function | [Open/short compensation] [Load compensation] Number of sets of compensation condi- tions: Up to 5 [Cable length compensation] Cable length settings: 0 m, 1 m, 2 m, 4 m [Correlation compensation] Compensation of display values based on user-input compensation coefficient |
| Contact check | [4-terminal contact check] Performs a contact (disconnection) check between H CUR and H POT and between L CUR and L POT. [High-Z reject function] Detection of OPEN state during 2-terminal measurement. |
| Memory function | Measurement result items (maximum 32000 items) can be saved to the instrument. Memory can be read using communications commands or a USB flash drive. |
| Panel save and load functions | Measurement conditions: Up to 60 Compensation values: Up to 128 |
| Interfaces | EXT. I/O( HANDLER) ,USB, USB flash drive, LAN, GP-IB, RS-232C |
| BCD output | [Output from EXT. I/O connector] Generates BCD output for the No.1 and No.3 parameter measured values. *Input and output signals are set to BCD mode (selection with judgment output). |
| Key lock function | Lock operation of the instrument using the touch screen. Unlock by entering a passcode. |
| Display settings | LCD display on/off Off: The display turns off 10 sec. after the touch panel is last touched. |
| Display | 5.7-inch color TFT with touch panel |
| Beep tone | Enable or disable for judgment results and key operation. |
| Operating temperature and humidity | 0°C to 40°C (32°F to 104°F), 80% RH, non-condensing |
| Storage temperature and humidity | -10°C to 50°C (14°F to 122°F), 80% RH, non-condensing |
| Operating environment | Indoors, Pollution Degree 2, altitude up to 2000 m (6562-ft.) |
| Power supply and maximum rated power | 100 V AC to 240 V AC (50/60 Hz), 50 VA |
| Dielectric strength | 1.62 kV AC for 1 min. between power line and ground line |
| Standards compliance | EMC: EN 61326, EN 61000 Safety: EN 61010 |
| Dimensions and Mass | Approx. 330 W × 119 H × 230 D mm (12.99 W × 4.69 H × 9.06 D in) , approx. 4.2 kg (148.1 oz.) |
| Accessories | Power cord ×1, Instruction manual ×1, LCR application disc (Communications user manual) ×1 |
Reviews (0)
You must be logged in to post a review.
Reviews
There are no reviews yet.