Hioki IM3570 Impedance Analyzer, 4Hz-5MHz, 0.5ms (100kHz)
$7,880.00
Technical Specs
Hioki IM3570 - Impedance Analyzer, 4Hz-5MHz, Continous LCR/DCR/Sweep, 0.5ms (100kHz), IM3500 Series Specs
| Measurement modes | LCR mode: Measurement under single set of conditions Analyzer mode: Sweep through measurement frequencies and measurement levels (Measurement points: 1 to 801; sweep methods: normal sweep or segmented sweep; display: list display or graph display) Continuous measurement mode: Continuous measurement under saved conditions (of which up to 32 sets can be saved) |
| Measurement Parameters | Z, Y, θ, Rs (ESR), Rp, Rdc (DC resistance), X, G, B, Cs, Cp, Ls, Lp, D (tan õ), Q |
| Measurement ranges | 100 mΩ to 100 MΩ, 12 ranges (all parameters are defined using Z) |
| Basic accuracy | Z: ±0.08% rdg θ: ±0.05° |
| Measurement frequencies | 4 Hz to 5 MHz (in 10 mHz to 100 Hz steps) |
| Measurement signal levels | Normal mode: V mode, CV mode: 5 mV to 5 Vrms (up to 1 MHz), 10 mV to 1 Vrms (1 MHz to 5 MHz), 1 mVrms steps CC mode: 10 µA to 50 mArms (up to 1 MHz), 10 µA to 10 mArms (1 MHz to 5 MHz), 10 µArms steps Low-impedance high-precision mode: V mode, CV mode: 5 mV to 1 Vrms (up to 100 kHz), 1 mVrms steps CC mode: 10 µA to 100 mArms (100 mΩ and 1 Ω ranges up to 100 kHz), 10 µArms steps |
| Output impedance | Normal mode: 100 Ω Low-impedance high-precision mode: 10 Ω |
| Display: | 5.7-inch color TFT, on/off switchable |
| No. of display digits setting | Number of display digits can be set from 3 to 7; default setting: 6 digits |
| Measurement time | 0.5 ms (100 kHz, FAST, display off, representative value) |
| Measurement speeds | FAST/MED/SLOW/SLOW2 |
| DC bias measurement | Normal mode: 0 to 2.50 V DC (10 mV steps) Low-impedance high-precision mode: 0 to 1.00 V DC (10 mV steps) |
| DC resistance measurement | Normal mode: Measurement signal level of 100 mV to 2.5 V DC (10 mV steps) Low-impedance high-precision mode: Measurement signal level of 100 mV to 1.00 V DC (10 mV steps) |
| Comparator | LCR mode: Hi/IN/Lo for first and third values Analyzer mode: Area judgment (Hi/IN/Lo for each point), peak judgment (Hi/IN/Lo for maximum and minimum frequencies and absolute values) |
| Memory function | Storage of 32,000 data points in the instrument’s internal memory |
| Interfaces | EXT I/O (handler) RS-232C GP-IB USB (Hi-speed/Full-speed) USB memory LAN (10Base-T/100Base-TX) |
| Power supply | 90 to 264 V AC, 50/60 Hz, 150 VA max. |
| Dimensions and weight | Approx. 330 (W) × 119 (H) × 307 (D) mm, approx. 5.8 kg |
Reviews (0)
You must be logged in to post a review.
Reviews
There are no reviews yet.